AUXILIARY BATTERY INSTALLATION

PROCEDURE

1. INSTALL AUXILIARY BATTERY

   
   

   1. Install the auxiliary battery.

   2. Install the battery clamp with the 2 bolts and nut.

      Torque:

      for Bolt

      4.9 N*m  { 50 kgf*cm, 43 in.*lbf }

      for Nut

      2.9 N*m  { 30 kgf*cm, 26 in.*lbf }

   3. Connect the cable to the positive (+) auxiliary battery terminal.

   4. Close the battery terminal cover.

   5. Connect the fusible link block assembly with the 2 nuts.

      Torque:

      6.8 N*m  { 69 kgf*cm, 60 in.*lbf }

   6. Connect the cable to the negative (-) auxiliary battery terminal.

      Note

      When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

2. CONNECT BATTERY HOSE

   
   

   1. Connect the battery hose to the auxiliary battery without kinking it.

      Tech Tips

      
      

      • Push in the battery hose to the auxiliary battery until a click sound is heard.

      • Confirm that the L-type pipe is facing towards the inside of the vehicle.

3. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH

   Click here

4. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

   Click here