NAVIGATION ANTENNA INSTALLATION

PROCEDURE

1. INSTALL NAVIGATION ANTENNA ASSEMBLY (for RHD)

   
   

   1. Install the navigation antenna with the 2 screws.

   2. Attach the 5 clamps.

2. INSTALL DEFROSTER NOZZLE ASSEMBLY (for RHD)

   Click here

3. INSTALL NO. 1 HEATER TO REGISTER DUCT (for RHD)

   Click here

4. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT (for RHD)

   Click here

5. INSTALL NAVIGATION ANTENNA ASSEMBLY (for LHD)

   
   

   1. Install the navigation antenna with the 2 screws.

   2. Attach the 4 clamps.

6. INSTALL NO. 3 HEATER TO REGISTER DUCT

   Click here

7. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT

   Click here

8. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

   Click here

9. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

10. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

11. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

    Click here

12. CHECK SRS WARNING LIGHT

    Click here