HARD DISK DRIVE REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery terminal notice before proceeding with work Click here.

  2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT

    Click here

  3. REMOVE LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

  4. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL

    Click here

  6. REMOVE MULTI-MEDIA MODULE RECEIVER ASSEMBLY

    Click here

  7. REMOVE NO. 2 RADIO BRACKET

    Click here

  8. REMOVE HARD DISC


    1. A000ODV

      Remove the 3 screws.

    2. A000R1N

      Move the cover in the direction of the arrow shown in the illustration to remove it.

    3. A000SSM

      Remove the hard disc in the direction of the arrow shown in the illustration.