RADIO ANTENNA CORD REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery terminal notice before proceeding with work Click here.

  2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT

    Click here

  3. REMOVE LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

  4. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL

    Click here

  6. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

    Click here

  7. REMOVE INSTRUMENT PANEL FINISH PANEL END RH

    Click here

  8. REMOVE INSTRUMENT PANEL CUP HOLDER ASSEMBLY

    Click here

  9. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  10. REMOVE UPPER CONSOLE PANEL

    Click here

  11. REMOVE MULTI-MEDIA MODULE RECEIVER ASSEMBLY

    Click here

  12. REMOVE ANTENNA CORD SUB-ASSEMBLY


    1. A000SJT

      Disconnect the connector.

    2. Detach the 2 clamps and remove the antenna cord sub-assembly.

  13. REMOVE CONSOLE BOX ASSEMBLY

    Click here

  14. REMOVE FRONT SEAT ASSEMBLY RH

    Click here

  15. REMOVE REAR SEAT ASSEMBLY

    Click here

  16. REMOVE REAR DOOR SCUFF PLATE RH

    Click here

  17. REMOVE REAR SEAT SIDE GARNISH RH

    Click here

  18. REMOVE INNER ROOF SIDE GARNISH RH

    Click here

  19. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY


    1. Disconnect the connectors labeled A.

      A000PWBE03

    2. Remove the bolt labeled B.

    3. Remove the bolt labeled C.

    4. Remove the bolt labeled D.

    5. Detach the 2 clips labeled E.

    6. Detach the clamp labeled F.

    7. Detach the 3 clamps labeled G from the floor stud bolts.

    8. Detach the 5 clamps labeled H and remove the No. 2 antenna cord sub-assembly.

  20. REMOVE ROOF HEADLINING ASSEMBLY

    Click here

  21. REMOVE NO. 3 ANTENNA CORD SUB-ASSEMBLY


    1. Disconnect the connectors.

      A000N3YE02
      Text in Illustration
      *a w/ Digital Audio Broadcasting - -

    2. Detach the 5 clamps and remove the No. 3 antenna cord sub-assembly.