REAR DOOR SPEAKER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL REAR NO. 2 SPEAKER ASSEMBLY


    1. Attach the clip to install the rear No. 2 speaker assembly.

      Note

      Do not touch the cone of the speaker.

    2. Connect the connector.

  2. INSTALL REAR SPEAKER ASSEMBLY


    1. A000RNIE03
      Text in Illustration
      *A w/o Mark Levinson Speaker System
      *B w/ Mark Levinson Speaker System

      Connect the speaker connector.

    2. Temporarily install the speaker by attaching the claw of the speaker to the door panel.

    3. Install the rear speaker assembly with the 3 screws.

      Note

      Do not touch the cone of the speaker.

      Tech Tips

      Tighten the screws in the order shown in the illustration.

  3. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH

    Click here

  4. INSTALL REAR DOOR HOLE COVER

    Click here

  5. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL

    Click here

  6. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG LH

    Click here

  7. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  8. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

  9. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

    Click here