FRONT DOOR SPEAKER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY


    1. Connect the speaker connector.

      A000PAME03
      Text in Illustration
      *A w/o Mark Levinson Speaker System *B w/o Mark Levinson Speaker System

    2. Temporarily install the speaker by attaching the claw of the speaker to the door panel.

    3. Install the front No. 1 speaker assembly with the 4 screws.

      Note

      Do not touch the cone of the speaker.

      Tech Tips

      Tighten the screws in the order shown in the illustration.

  2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH

    Click here

  3. INSTALL FRONT DOOR HOLE COVER

    Click here

  4. INSTALL COURTESY LIGHT ASSEMBLY

    Click here

  5. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL

    Click here

  6. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH

    Click here

  7. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  8. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

  9. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

    Click here