TILT AND TELESCOPIC MANUAL SWITCH INSTALLATION

PROCEDURE

1. INSTALL TILT AND TELESCOPIC SWITCH

   
   

   1. Attach the claw to install the tilt and telescopic switch.

   2. Connect the connector.

2. INSTALL STEERING COLUMN COVER

   
   

   1. Attach the 2 claws to install the steering column lower cover.

      Note

      Do not damage the tilt and telescopic switch.

   2. Install the 3 screws.

      Tech Tips

      Turn the steering wheel to the right and left as necessary to install the 2 screws.

3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Click here

4. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

   Click here

5. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH

   Click here