TIRE PRESSURE WARNING INITIATOR DRIVER(for RHD) INSTALLATION

PROCEDURE

1. PRECAUTION

   CAUTION:

   Be sure to read Precaution thoroughly before servicing Click here.

2. INSTALL TIRE PRESSURE MONITOR INITIATOR DRIVER

   
   

   1. Install the tire pressure monitor initiator driver with the nut.

      Torque:

      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

   2. Connect the connector.

3. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

   Click here

4. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

5. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH

   Click here

6. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

   Click here

7. INSPECT TIRE PRESSURE WARNING SYSTEM

   Click here