CRUISE CONTROL MAIN SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for LHD and RHD vehicles.

  • The procedures listed below are for LHD vehicles.

PROCEDURE


  1. INSTALL CRUISE CONTROL MAIN SWITCH


    1. Install the cruise control main switch with the 2 screws.

      Torque:
      2.4 N*m  { 24 kgf*cm, 21 in.*lbf }

    2. Connect the connector.

    3. Attach the clamp.

  2. INSTALL STEERING PAD

    Click here

  3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

  5. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

    Click here

  6. CHECK SRS WARNING LIGHT

    Click here