BATTERY COOLING DUCT(w/ Filter) INSTALLATION

PROCEDURE

1. INSTALL NO. 6 HYBRID BATTERY INTAKE DUCT

   
   

   1. Connect the No. 6 hybrid battery intake duct to the No. 3 hybrid battery intake duct.

   2. Install the No. 6 hybrid battery intake duct with the 2 clips.

      Note

      The No. 6 hybrid battery intake duct should be connected securely.

2. INSTALL REAR SEAT SIDE GARNISH LH

   Click here

3. INSTALL REAR DOOR SCUFF PLATE LH

   Click here

4. INSTALL NO. 1 HYBRID BATTERY INTAKE DUCT

   
   

   1. Connect the No. 1 hybrid battery intake duct to the battery cooling blower assembly.

   2. Install the No. 1 hybrid battery intake duct with the 2 clips.

      Note

      The No. 1 hybrid battery intake duct should be connected securely.

   3. 

      Return the No. 1 room partition pad to its original position.

5. INSTALL REAR SEAT SIDE GARNISH RH

   Click here

6. INSTALL REAR DOOR SCUFF PLATE RH

   Click here

7. INSTALL REAR SEAT ASSEMBLY

   Click here

8. CONNECT CABLE TO AUXILIARY NEGATIVE BATTERY TERMINAL (w/ Rear Seat Side Airbag)

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

9. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH (w/ Rear Seat Side Airbag)

   Click here

10. INSTALL LUGGAGE COMPARTMENT FLOOR MAT (w/ Rear Seat Side Airbag)

    Click here

11. CHECK SRS WARNING LIGHT (w/ Rear Seat Side Airbag)

    Click here

12. INSPECT REAR SEAT HEATER SYSTEM (w/ Seat Heater System)

    Click here

13. INSPECT REAR SUNSHADE SYSTEM (for Luxury Seat Type)

    Click here

14. CLEAR DTC

    Click here

    Tech Tips

    When "Maintenance Required for Hybrid Battery Cooling Parts at Your Dealer" is displayed on the multi-information display of the combination meter assembly and the hybrid battery duct is cleaned or replaced, clear the DTCs regardless of the stored DTCs in order to reset the learned values.