BATTERY BLOWER INSTALLATION

PROCEDURE

1. INSTALL BATTERY COOLING BLOWER ASSEMBLY (for Upper Side)

   CAUTION:

   Perform work using insulated gloves and insulated tools.

   
   

   1. Install the battery cooling blower assembly with the 3 nuts.

      Torque:

      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

      Note

      
      

      • Hold the wire harness and fan, and do not install them.

      • Make sure that foreign matter does not enter the battery cooling blower assembly.

2. INSTALL NO. 4 HYBRID BATTERY INTAKE DUCT

   Click here

3. INSTALL NO. 2 HYBRID VEHICLE BATTERY UPPER COVER BRACKET

   Click here

4. INSTALL BATTERY SMART UNIT

   Click here

5. INSTALL NO. 4 HYBRID VEHICLE BATTERY CARRIER BRACKET SUB-ASSEMBLY

   Click here

6. INSTALL HYBRID BATTERY JUNCTION BLOCK ASSEMBLY

   Click here

7. INSTALL UPPER HYBRID BATTERY COVER SUB-ASSEMBLY

   Click here

8. INSTALL REAR NO. 1 HYBRID BATTERY SHIELD

   Click here

9. INSTALL NO. 1 HV BATTERY SHIELD PANEL

   Click here

10. INSTALL NO. 3 HYBRID BATTERY INTAKE DUCT

    Click here

11. INSTALL BRAKE CONTROL POWER SUPPLY ASSEMBLY

    Click here

12. INSTALL NO. 6 HYBRID BATTERY INTAKE DUCT

    Click here

13. INSTALL BATTERY COOLING BLOWER ASSEMBLY (for Lower Side)

    CAUTION:

    Perform work using insulated gloves and insulated tools.

    
    

    1. Install the battery cooling blower assembly with the 3 nuts.

       Torque:

       7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

       Note

       
       

       • Hold the wire harness and fan, and do not install them.

       • Make sure that foreign matter does not enter the battery cooling blower assembly.

    2. Connect the connector.

    3. Attach the wire harness clamp and connect the connector.

14. INSTALL VOLTAGE INVERTER ASSEMBLY (w/ Voltage Inverter)

    Click here

15. INSTALL NO. 1 HYBRID BATTERY INTAKE DUCT

    Click here

16. CONNECT NO. 4 FLOOR WIRE

    Click here

17. CHECK HIGH VOLTAGE CABLE CONNECTION CONDITION

    Click here

18. INSTALL NO. 4 HYBRID VEHICLE BATTERY SHIELD SUB-ASSEMBLY

    Click here

19. INSTALL INNER LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

20. INSTALL INNER LUGGAGE COMPARTMENT TRIM COVER RH

    Click here

21. INSTALL ROPE HOOK

    Click here

22. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER

    Click here

23. INSTALL REAR FLOOR FINISH PLATE

    Click here

24. INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER

    Click here

25. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

    Click here

26. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Click here

27. INSTALL REAR LUGGAGE COMPARTMENT TRAY BRACKET LH

    Click here

28. INSTALL REAR LUGGAGE COMPARTMENT TRAY BRACKET RH

    Click here

29. INSTALL ROPE HOOK ASSEMBLY

    Click here

30. INSTALL LUGGAGE COMPARTMENT SIDE TRAY (w/ Spare Tire)

    Click here

31. INSTALL SPARE WHEEL COVER TRAY (w/o Spare Tire)

    Click here

32. INSTALL LUGGAGE COMPARTMENT TRIM BOX (w/o Spare Tire)

    Click here

33. INSTALL SIDE TRIM BOX

    Click here

34. INSTALL LUGGAGE COMPARTMENT TRIM COVER RH

    Click here

35. INSTALL NO. 1 ROOM PARTITION PAD

    Click here

36. INSTALL NO. 2 ROOM PARTITION PAD

    Click here

37. INSTALL NO. 2 PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade)

    Click here

38. INSTALL CENTER STOP LIGHT COVER (w/ Rear Sunshade)

    Click here

39. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY

    Click here

40. INSTALL INNER ROOF SIDE GARNISH LH

    Click here

41. INSTALL REAR SEAT SIDE GARNISH LH

    Click here

42. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

43. INSTALL INNER ROOF SIDE GARNISH RH

    Click here

44. INSTALL REAR SEAT SIDE GARNISH RH

    Click here

45. INSTALL REAR DOOR SCUFF PLATE RH

    Click here

46. INSTALL REAR SEAT ASSEMBLY

    Click here

47. INSTALL SERVICE PLUG GRIP

    Click here

48. INSTALL LOWER HYBRID VEHICLE BATTERY COVER PANEL

    Click here

49. INSTALL NO. 1 SEAT ARMREST CAP

    Click here

50. CONNECT CABLE TO AUXILIARY BATTERY TERMINAL

    Click here

51. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

52. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

    Click here