BATTERY SMART UNIT INSTALLATION

PROCEDURE

1. INSTALL BATTERY SMART UNIT

   CAUTION:

   Perform work using insulated gloves and insulated tools.

   
   

   1. Install the battery smart unit with the 2 nuts.

      Torque:

      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

   2. Connect the 3 connectors.

2. INSTALL NO. 4 HYBRID VEHICLE BATTERY CARRIER BRACKET SUB-ASSEMBLY

   CAUTION:

   Perform work using insulated gloves and insulated tools.

   
   

   1. Install the No. 4 hybrid vehicle battery carrier bracket sub-assembly.

   2. Attach the wire harness clamp.

3. INSTALL HYBRID BATTERY JUNCTION BLOCK ASSEMBLY

   Click here

4. INSTALL UPPER HYBRID BATTERY COVER SUB-ASSEMBLY

   Click here

5. INSTALL REAR NO. 1 HYBRID BATTERY SHIELD

   Click here

6. INSTALL BATTERY COOLING BLOWER ASSEMBLY

   Click here

7. INSTALL VOLTAGE INVERTER ASSEMBLY (w/ Voltage Inverter)

   Click here

8. INSTALL NO. 1 HV BATTERY SHIELD PANEL

   Click here

9. INSTALL NO. 3 HYBRID BATTERY INTAKE DUCT

   Click here

10. INSTALL BRAKE CONTROL POWER SUPPLY ASSEMBLY

    Click here

11. INSTALL NO. 6 HYBRID BATTERY INTAKE DUCT

    Click here

12. INSTALL NO. 1 HYBRID BATTERY INTAKE DUCT

    Click here

13. CONNECT NO. 4 FLOOR WIRE

    Click here

14. CHECK HIGH VOLTAGE CABLE CONNECTION CONDITION

    Click here

15. INSTALL NO. 4 HYBRID VEHICLE BATTERY SHIELD SUB-ASSEMBLY

    Click here

16. INSTALL INNER LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

17. INSTALL INNER LUGGAGE COMPARTMENT TRIM COVER RH

    Click here

18. INSTALL ROPE HOOK

    Click here

19. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER

    Click here

20. INSTALL REAR FLOOR FINISH PLATE

    Click here

21. INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER

    Click here

22. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

    Click here

23. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Click here

24. INSTALL REAR LUGGAGE COMPARTMENT TRAY BRACKET LH

    Click here

25. INSTALL REAR LUGGAGE COMPARTMENT TRAY BRACKET RH

    Click here

26. INSTALL ROPE HOOK ASSEMBLY

    Click here

27. INSTALL LUGGAGE COMPARTMENT SIDE TRAY (w/ Spare Tire)

    Click here

28. INSTALL SPARE WHEEL COVER TRAY (w/o Spare Tire)

    Click here

29. INSTALL LUGGAGE COMPARTMENT TRIM BOX (w/o Spare Tire)

    Click here

30. INSTALL SIDE TRIM BOX

    Click here

31. INSTALL LUGGAGE COMPARTMENT TRIM COVER RH

    Click here

32. INSTALL NO. 1 ROOM PARTITION PAD

    Click here

33. INSTALL NO. 2 ROOM PARTITION PAD

    Click here

34. INSTALL NO. 2 PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade)

    Click here

35. INSTALL CENTER STOP LIGHT COVER (w/ Rear Sunshade)

    Click here

36. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY

    Click here

37. INSTALL INNER ROOF SIDE GARNISH LH

    Click here

38. INSTALL REAR SEAT SIDE GARNISH LH

    Click here

39. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

40. INSTALL INNER ROOF SIDE GARNISH RH

    Click here

41. INSTALL REAR SEAT SIDE GARNISH RH

    Click here

42. INSTALL REAR DOOR SCUFF PLATE RH

    Click here

43. INSTALL REAR SEAT ASSEMBLY

    Click here

44. INSTALL SERVICE PLUG GRIP

    Click here

45. INSTALL LOWER HYBRID VEHICLE BATTERY COVER PANEL

    Click here

46. INSTALL NO. 1 SEAT ARMREST CAP

    Click here

47. CONNECT CABLE TO AUXILIARY BATTERY TERMINAL

    Click here

48. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

49. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

    Click here