SERVICE PLUG GRIP INSTALLATION

PROCEDURE


  1. INSTALL SERVICE PLUG GRIP

    CAUTION:

    Wear insulated gloves.

    Note

    Before connecting the service plug, check that no parts and tools remain and that the high voltage terminals and connectors are connected securely.

    A000MZSE03
    Text in Illustration
    *1 Lever - -

    1. Install the service plug grip in the order shown in the illustration.


      1. Insert the service plug grip and rotate the lever.

      2. Slide the lever until a click sound is heard to lock the lever.

  2. INSTALL LOWER HYBRID VEHICLE BATTERY COVER PANEL

    CAUTION:

    Perform work using insulated gloves and insulated tools.


    1. A000NWRE01
      Text in Illustration
      *1 Arrow

      Install the lower hybrid vehicle battery cover panel with the 4 nuts.

      Tech Tips

      Be sure to install the lower hybrid vehicle battery cover panel with its arrow facing upwards.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

  3. INSTALL NO. 1 SEAT ARMREST CAP

    Click here

  4. CONNECT CABLE TO AUXILIARY NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable some systems need to be initialized after the cable is reconnected Click here.


    1. Connect the cable to the auxiliary battery negative (-) terminal.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

  5. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

  6. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

    Click here