BATTERY BLOWER INSTALLATION

PROCEDURE

1. INSTALL BATTERY COOLING BLOWER ASSEMBLY

   CAUTION:

   Perform work using insulated gloves and insulated tools.

   
   

   1. Install the battery cooling blower assembly with the 3 nuts.

      Torque:

      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

      Note

      
      

      • Hold the wire harness and fan, and do not install them.

      • Make sure that foreign matter does not enter the battery cooling blower assembly.

   2. Attach the wire harness clamp and connect the 3 connectors.

2. INSTALL VOLTAGE INVERTER ASSEMBLY (w/ Voltage Inverter)

   Click here

3. INSTALL NO. 3 HYBRID BATTERY INTAKE DUCT

   Click here

4. INSTALL NO. 1 HYBRID BATTERY INTAKE DUCT

   Click here

5. INSTALL INNER LUGGAGE COMPARTMENT TRIM COVER LH

   Click here

6. INSTALL INNER LUGGAGE COMPARTMENT TRIM COVER RH

   Click here

7. INSTALL ROPE HOOK

   Click here

8. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER

   Click here

9. INSTALL REAR FLOOR FINISH PLATE

   Click here

10. INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER

    Click here

11. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

    Click here

12. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Click here

13. INSTALL REAR LUGGAGE COMPARTMENT TRAY BRACKET LH

    Click here

14. INSTALL REAR LUGGAGE COMPARTMENT TRAY BRACKET RH

    Click here

15. INSTALL ROPE HOOK ASSEMBLY

    Click here

16. INSTALL LUGGAGE COMPARTMENT SIDE TRAY (w/ Spare Tire)

    Click here

17. INSTALL SPARE WHEEL COVER TRAY (w/o Spare Tire)

    Click here

18. INSTALL LUGGAGE COMPARTMENT TRIM BOX (w/o Spare Tire)

    Click here

19. INSTALL SIDE TRIM BOX

    Click here

20. INSTALL LUGGAGE COMPARTMENT TRIM COVER RH

    Click here

21. INSTALL NO. 1 ROOM PARTITION PAD

    Click here

22. INSTALL NO. 2 ROOM PARTITION PAD

    Click here

23. INSTALL NO. 2 PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade)

    Click here

24. INSTALL CENTER STOP LIGHT COVER (w/ Rear Sunshade)

    Click here

25. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY

    Click here

26. INSTALL INNER ROOF SIDE GARNISH LH

    Click here

27. INSTALL REAR SEAT SIDE GARNISH LH

    Click here

28. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

29. INSTALL INNER ROOF SIDE GARNISH RH

    Click here

30. INSTALL REAR SEAT SIDE GARNISH RH

    Click here

31. INSTALL REAR DOOR SCUFF PLATE RH

    Click here

32. INSTALL REAR SEAT ASSEMBLY

    Click here

33. INSTALL SERVICE PLUG GRIP

    Click here

34. INSTALL LOWER HYBRID VEHICLE BATTERY COVER PANEL

    Click here

35. INSTALL NO. 1 SEAT ARMREST CAP

    Click here

36. CONNECT CABLE TO AUXILIARY BATTERY TERMINAL

    Click here

37. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

38. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

    Click here