ECM INSTALLATION

PROCEDURE


  1. INSTALL ENGINE ROOM ECU BOX


    1. Install the engine room ECU box to the ECM.

  2. INSTALL ENGINE ROOM ECU COVER


    1. Attach the 3 claws to install the engine room ECU cover to the engine room ECU box.

  3. INSTALL NO. 2 ECM BRACKET


    1. Install the No. 2 ECM bracket to the engine room ECU cover with the 2 bolts.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

  4. INSTALL ECM BRACKET


    1. Install the ECM bracket to the engine room ECU box with the 2 bolts.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

  5. INSTALL ECM


    1. Install the ECM with the 2 nuts.

      Torque:
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

      Note

      If the ECM has been struck or dropped, replace it.

    2. Connect the 2 wire harness clamps.

    3. A000OCS

      Connect the 2 ECM connectors and lower the 2 levers.

      Note


      • When connecting the ECM connectors, make sure that dirt, water or other foreign matter does not get caught between the ECM connectors and other parts.

      • Make sure that the 2 levers are securely locked.

    4. Connect the wire harness clamp.

  6. INSTALL COOL AIR INTAKE DUCT SEAL

    Click here

  7. INSTALL ENGINE ROOM SIDE COVER

    Click here

  8. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  9. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

  10. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

    Click here

  11. PERFORM INITIALIZATION