REAR COMBINATION LIGHT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL REAR COMBINATION LIGHT LENS GASKET LH


    1. install a new rear combination light lens gasket LH.

  2. INSTALL REAR COMBINATION LIGHT GUIDE


    1. install the rear combination light guide to the body.

  3. INSTALL UPPER REAR BUMPER RETAINER LH


    1. Attach the 2 claws and install the upper rear bumper retainer LH.

  4. INSTALL REAR COMBINATION LIGHT ASSEMBLY LH

    A000SK6

    1. Attach the 2 clips, guide to set the rear combination light assembly LH.

    2. Attach the wire harness clamp.

    3. Install the 3 nuts.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    4. Connect the connector.

  5. CONNECT LUGGAGE COMPARTMENT TRIM INNER COVER LH


    1. A000OS0

      Return the luggage compartment trim inner cover LH to its original position.

  6. INSTALL ROPE HOOK

    Click here

  7. INSTALL REAR BUMPER COVER

    Click here