AUTOMATIC HIGH BEAM SYSTEM, Diagnostic DTC:B124B

DTC Code DTC Name
B124B Automatic High Beam System

DESCRIPTION

The main body ECU (multiplex network body ECU) determines the status of the automatic high beam system based on the automatic high beam system signal from the forward recognition camera.

DTC Code DTC Detection Condition Trouble Area
B124B Malfunction in automatic high beam system
  • CAN communication system

  • Main body ECU (multiplex network body ECU)

  • Forward recognition camera

  • Pre-crash safety system

  • LKA/LDA system

  • SFI system

  • Forward recognition camera system

  • Electronically controlled system

WIRING DIAGRAM

B002B4QE01
*1 Forward Recognition Camera
*2 Main Body ECU (Multiplex Network Body ECU)
*3 CAN Communication Line

CAUTION / NOTICE / HINT

Note

First perform the communication function inspections in How to Proceed with Troubleshooting to confirm that there are no CAN communication malfunctions before troubleshooting this symptom Click here.

Tech Tips


  • This DTC is output simultaneously from the forward recognition camera when DTCs related to the items below are output.


    • Wheel speed sensor malfunction

    • Yaw rate sensor malfunction

    • Steering angle sensor system malfunction

    • CAN communication lost

PROCEDURE


  1. CHECK FOR DTC (HEALTH CHECK)


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: System Select / Health Check.

    5. Check for DTCs.

      Result
      Result Proceed to
      Only DTC B124B is output A
      DTC B124B is output at the same time B

    B
    A
  2. CHECK FORWARD RECOGNITION CAMERA


    1. Check if a dynamic radar cruise control system, LKA/LDA system and pre-crash safety system warning message is displayed on the combination meter assembly Click here.

      OK
      No dynamic radar cruise control system, LKA/LDA system and pre-crash safety system warning messages are displayed.

    OK
    NG