LUGGAGE COMPARTMENT DOOR REASSEMBLY

PROCEDURE


  1. INSTALL LICENSE PLATE LIGHT ASSEMBLY

    Click here

  2. INSTALL LUGGAGE ELECTRICAL KEY SWITCH


    1. Install the luggage electrical key switch with the 2 screws.

    2. Connect the connector.

  3. INSTALL REAR TELEVISION CAMERA ASSEMBLY

    Click here

  4. INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY

    Click here

  5. INSTALL NO. 3 LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH

    Click here

  6. INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH

    Tech Tips

    Use the same procedure described for the No. 3 luggage compartment door outside garnish.

  7. INSTALL REAR LIGHT ASSEMBLY LH

    Click here

  8. INSTALL REAR LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  9. INSTALL REAR SPOILER SUB-ASSEMBLY (w/ Rear Spoiler)

    Click here

  10. INSTALL LUGGAGE DOOR LOCK CONTROL CABLE SUB-ASSEMBLY


    1. Attach the luggage door lock control cable sub-assembly to the luggage compartment door lock cylinder assembly.

  11. INSTALL LUGGAGE COMPARTMENT KEY CYLINDER PROTECTOR


    1. Install the luggage compartment key cylinder protector to the luggage compartment door lock cylinder assembly with the nut.

  12. INSTALL LUGGAGE COMPARTMENT DOOR LOCK CYLINDER ASSEMBLY


    1. B002B9Q

      Pass the luggage door lock control cable sub-assembly through the luggage compartment door panel as shown in the illustration.

    2. Install the luggage compartment door lock cylinder assembly with the 2 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    3. Attach the clamp of the luggage door lock control cable sub-assembly.

  13. INSTALL LUGGAGE LOCK CONTROL CABLE CLAMP (w/ Handle)


    1. Attach the guide and claw to install the luggage lock control cable clamp.

  14. INSTALL LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY

    Click here

  15. INSTALL LUGGAGE DOOR LOCK CONTROL CABLE SUB-ASSEMBLY (w/ Handle)


    1. Attach the clamp of the luggage compartment door lock assembly and the clamp of the luggage lock control cable clamp to install the luggage door lock control cable sub-assembly.

  16. INSTALL DOOR CONTROL SWITCH (w/ Power Trunk Lid System)


    1. Install the door control switch with the 2 bolts.

    2. Connect the connector.

  17. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER LH


    1. Install the luggage compartment door hinge cover LH with the 3 clips.

  18. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER RH


    1. Attach the clip to install the luggage compartment door hinge cover RH.

    2. Install the 3 clips.

  19. INSTALL LUGGAGE COMPARTMENT TRIM INNER COVER LH

    Click here

  20. INSTALL LUGGAGE COMPARTMENT TRIM INNER COVER RH

    Click here

  21. INSTALL LUGGAGE COMPARTMENT DOOR COVER


    1. Install the luggage compartment door cover with the 15 clips.

  22. INSTALL SWITCH BEZEL (w/ Power Trunk Lid System)


    1. Attach the 2 claws to install the switch bezel.

  23. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP


    1. Install the luggage compartment door assist grip with the 2 screws.

    2. Attach the 2 claws and close the cover.

  24. INSTALL LUGGAGE COMPARTMENT DOOR INSIDE HANDLE (w/ Handle)


    1. Connect the luggage compartment door inside handle to the luggage door lock control cable sub-assembly.

  25. INSTALL LUGGAGE LOCK CONTROL CABLE PLATE (w/ Handle)


    1. Attach the 2 claws to install the luggage lock control cable plate.

  26. ADJUST REAR TELEVISION CAMERA ASSEMBLY

    Click here