| DTC Code | DTC Name |
|---|---|
| B2222 | PBD Pulse Sensor Malfunction |
| B2225 | Back Door Motor Clutch Malfunction |
DESCRIPTION
DTC B2222 is output in the following situations: 1) When the pulse sensor of the luggage closer motor assembly has a malfunction and a normal waveform is not input into the pulse sensor during the power trunk lid operation, or 2) When there is a malfunction in the power trunk opener and closer activation power supply.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| B2222 | Pulse sensor of luggage closer motor assembly has malfunction or activation power supply has malfunction |
|
| B2225 | Clutch of luggage closer motor assembly has malfunction or activation power supply has malfunction |
WIRING DIAGRAM
Refer to the "System Diagram" Click here.
CAUTION / NOTICE / HINT
Note
Inspect the fuses for circuits related to this system before performing the following inspection procedure.
When using the GTS with the power switch off to troubleshoot:
Connect the GTS to the DLC3 and turn a courtesy light switch on and off at 1.5-seconds intervals until communication between the GTS and vehicle begins.
PROCEDURE
CLEAR DTC
Clear the DTCs Click here.
| NEXT |
|
CHECK FOR DTC
Check for DTCs Click here.
| OK |
|---|
| DTC B2222 or B2225 is not output. |
| OK |
|
USE SIMULATION METHOD TO CHECK Click here |
| NG |
|
CHECK HARNESS AND CONNECTOR (LUGGAGE CLOSER MOTOR ASSEMBLY - BATTERY)
| *a | Front view of wire harness connector (to Luggage Closer Motor Assembly) |
Disconnect the luggage closer motor assembly connector.
Measure the voltage according to the value(s) in the table below.
| Standard Voltage | ||||||
|---|---|---|---|---|---|---|
|
| OK |
|
REPLACE LUGGAGE CLOSER MOTOR ASSEMBLY Click here |
| NG |
|
REPAIR OR REPLACE HARNESS OR CONNECTOR |