TRUNK LID ACTUATOR INSTALLATION

PROCEDURE

1. INSTALL LUGGAGE CLOSER MOTOR ASSEMBLY

   
   

   1. Install the luggage closer motor assembly with the 3 bolts.

      Torque:

      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

   2. Install the nut.

      Torque:

      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

   3. Connect the connector.

2. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER LH

   Click here

3. INSTALL LUGGAGE COMPARTMENT TRIM INNER COVER LH

   Click here