LUGGAGE CLOSER ECU INSTALLATION

PROCEDURE

1. INSTALL LUGGAGE CLOSER MOTOR ASSEMBLY (w/ Power Trunk Lid System)

   
   

   1. Install the luggage closer motor assembly (multiplex network ECU) with the 3 bolts.

      Torque:

      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

   2. Install the nut.

      Torque:

      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

   3. Connect the connector.

2. INSTALL MULTIPLEX NETWORK DOOR ECU (w/o Power Trunk Lid System)

   
   

   1. Connect the connector.

   2. Attach the guide to install the multiplex network ECU with the bolt.

      Torque:

      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

3. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER LH (w/ Power Trunk Lid System)

   Click here

4. INSTALL LUGGAGE COMPARTMENT TRIM INNER COVER LH

   Click here