VOLTAGE INVERTER INSTALLATION

PROCEDURE

1. INSTALL VOLTAGE INVERTER ASSEMBLY

   
   

   1. for 2AR-FSE:

      
      

      1. 

         Set the voltage inverter assembly in place.

      2. Temporarily install the 2 nuts.

      3. Tighten the 2 nuts in the order shown in the illustration.

         Torque:

         8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

      4. Connect the connector and attach the clamp.

   2. for 2GR-FXE:

      
      

      1. 

         Set the voltage inverter assembly in place.

      2. Temporarily install the 2 nuts.

      3. Tighten the 2 nuts in the order shown in the illustration.

         Torque:

         8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

      4. Connect the wire harness with the bolt.

      5. Connect the connector.

2. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER

   Click here

3. INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER

   Click here

4. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

   Click here

5. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

   Click here

6. INSTALL LUGGAGE COMPARTMENT TRIM BOX (w/o Spare Tire)

   Click here

7. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

   Click here