ION GENERATOR INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL AIR DUCT SUB-ASSEMBLY


    1. Attach the 2 claws to install the air duct sub-assembly.

    2. Install the clip.

  2. INSTALL NO. 1 ION GENERATOR SUB-ASSEMBLY


    1. Attach the 2 claws to install the rear air duct sub-assembly.

    2. Install the No. 1 ion generator sub-assembly with the 2 screws.

    3. Attach the clamp.

  3. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  4. INSTALL MULTI-MEDIA MODULE RECEIVER ASSEMBLY

    Click here

  5. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL

    Click here

  6. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.