AUTOMATIC LIGHT CONTROL SENSOR INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL AUTOMATIC LIGHT CONTROL SENSOR


    1. Connect the connector.

    2. Attach the 2 claws to install the automatic light control sensor.

  2. INSTALL MULTI-DISPLAY (for 8 Inch)

    Click here

  3. INSTALL ACCESSORY METER ASSEMBLY (for 12.3 Inch)

    Click here

  4. INSTALL UPPER INSTRUMENT CLUSTER FINISH PANEL

    Click here

  5. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  6. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH

    Click here

  7. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

    Click here