AUTOMATIC HIGH BEAM MAIN SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY


    1. Engage the 2 claws to install the integration control and panel assembly.

  2. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  4. INSTALL NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

    Click here

  5. INSTALL INSTRUMENT SIDE PANEL LH

    Click here

  6. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

    Click here

  7. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL

    Click here

  8. INSTALL FRONT DOOR OPENING TRIM COVER LH

    Click here

  9. INSTALL FRONT DOOR SCUFF PLATE LH

    Click here