TURN SIGNAL FLASHER ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL TURN SIGNAL FLASHER ASSEMBLY


    1. Install the turn signal flasher with the bolt.

    2. Connect the connector.

  2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

    Click here

  3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY

    Click here

  4. INSTALL INSTRUMENT PANEL FINISH PLATE GARNISH (for RHD)

    Click here

  5. INSTALL INSTRUMENT CLUSTER FINISH PANEL ORNAMENT (for LHD)

    Click here

  6. INSTALL INSTRUMENT SIDE PANEL LH (for LHD)

    Click here

  7. INSTALL INSTRUMENT SIDE PANEL RH (for RHD)

    Click here

  8. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  9. INSTALL COWL SIDE TRIM BOARD LH (for LHD)

    Click here

  10. INSTALL COWL SIDE TRIM BOARD RH (for RHD)

    Click here

  11. INSTALL DOOR SCUFF PLATE ASSEMBLY LH (for LHD)

    Click here

  12. INSTALL DOOR SCUFF PLATE ASSEMBLY RH (for RHD)

    Click here