HEADLIGHT CLEANER SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • A bolt without a torque specification is shown in the standard bolt chart Click here.

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL ROOM LIGHT SWITCH ASSEMBLY (for LHD)


    1. Attach the 2 claws to install the switch.

  2. INSTALL ROOM LIGHT SWITCH ASSEMBLY (for RHD)


    1. Attach the 2 claws to install the switch.

  3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

    Click here

  4. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY (for LHD)

    Click here

  5. INSTALL INSTRUMENT PANEL FINISH PLATE GARNISH (for RHD)

    Click here

  6. INSTALL INSTRUMENT CLUSTER FINISH PANEL ORNAMENT (for LHD)

    Click here

  7. INSTALL INSTRUMENT SIDE PANEL LH

    Click here

  8. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  9. INSTALL COWL SIDE TRIM BOARD LH

    Click here

  10. INSTALL DOOR SCUFF PLATE ASSEMBLY LH

    Click here