FUEL LID LOCK CONTROL CABLE ASSEMBLY(for 3 Door) INSTALLATION

PROCEDURE


  1. INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY


    1. for LHD:

      Attach the 12 clamps to install the fuel lid lock control cable.

    2. for RHD:

      Attach the 14 clamps to install the fuel lid lock control cable.

    3. B001CCF

      Install the lock retainer and turn it clockwise.

    4. B001EH5

      Install the cable and turn it clockwise as shown in the illustration.

  2. INSTALL FRONT FLOOR CARPET ASSEMBLY


    1. for LHD:


      1. B001HES

        Return the front floor carpet to its original position and attach the 4 clamps.

    2. for RHD:


      1. B001EFU

        Return the front floor carpet to its original position and attach the 8 clamps.

  3. INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY

    Click here

  4. INSTALL DOOR SCUFF PLATE ASSEMBLY LH

    Click here

  5. INSTALL DOOR SCUFF PLATE ASSEMBLY RH (for RHD)

    Click here

  6. INSTALL REAR QUARTER TRIM PANEL ASSEMBLY LH

    Click here

  7. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

    Click here

  8. INSTALL OUTER LAP BELT ANCHOR COVER

    Click here

  9. INSTALL QUARTER TRIM POCKET TRAY

    Click here

  10. INSTALL FRONT DECK SIDE TRIM COVER (w/ Tonneau Cover)

    Click here

  11. INSTALL NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)

    Click here

  12. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Click here

  13. INSTALL REAR FLOOR CARPET ASSEMBLY

    Click here

  14. INSTALL QUARTER TRIM COVER HOLE LH

    Click here

  15. INSTALL QUARTER TRIM COVER HOLE RH

    Click here

  16. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE

    Click here

  17. INSTALL MAT SET PLATE COVER

    Click here

  18. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

  19. INSTALL REAR NO. 1 SEAT ASSEMBLY (w/ Rear No. 1 Seat)


    1. for LH Side:

      Install the rear No. 1 seat assembly Click here.

    2. for RH Side:

      Install the rear No. 1 seat assembly Click here.

  20. INSTALL CONSOLE BOX ASSEMBLY (for RHD)


    1. for Automatic Transmission:

      Install the console box assembly Click here.

    2. for Manual Transmission:

      Install the console box assembly Click here.

    3. w/ Refrigerated Cool Box:

      Install the console box assembly Click here.

  21. INSTALL FRONT SEAT ASSEMBLY (for RHD)


    1. for Manual Seat:

      Install the front seat assembly Click here.

    2. for Walk in Seat:

      Install the front seat assembly Click here.

  22. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.