VOLTAGE INVERTER(for 5 Door) INSTALLATION

PROCEDURE

1. INSTALL VOLTAGE INVERTER ASSEMBLY

   
   

   1. Install the voltage inverter with the 2 bolts.

      Torque:

      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

   2. Connect the connector.

2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH

   Click here

3. INSTALL ASSIST GRIP SUB-ASSEMBLY (w/ Rear No. 2 Seat)

   Click here

4. INSTALL ASSIST GRIP PLUG (w/ Rear No. 2 Seat)

   Click here

5. INSTALL FRONT DECK SIDE TRIM COVER (w/ Tonneau Cover)

   Click here

6. INSTALL NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)

   Click here

7. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

   Click here

8. INSTALL REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER

   Click here

9. INSTALL REAR FLOOR CARPET ASSEMBLY (w/o Rear No. 2 Seat)

   Click here

10. INSTALL FLOOR SIDE RAIL RH (w/ Deck Rail)

    Click here

11. INSTALL FLOOR SIDE RAIL LH (w/ Deck Rail)

    Click here

12. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE (w/o Rear No. 2 Seat)

    Click here

13. INSTALL NO. 1 DECK BOARD SUB-ASSEMBLY (w/o Rear No. 2 Seat)

    Click here

14. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER (w/o Rear No. 2 Seat)

    Click here

15. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

16. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Click here

17. INSTALL REAR DOOR SCUFF PLATE RH

    Click here

18. INSTALL QUARTER SCUFF PLATE RH (w/ Rear No. 2 Seat)

    Click here

19. INSTALL REAR NO. 1 FLOOR STEP COVER (w/ Rear No. 2 Seat)

    Click here