HEATER SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • A bolt without a torque specification is shown in the standard bolt chart.

    Click here

PROCEDURE


  1. INSTALL IDLE UP SWITCH


    1. Attach the 2 claws to install the idle up switch.

  2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

    Click here

  3. INSTALL INSTRUMENT SIDE PANEL LH

    Click here

  4. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH


    1. Install the front door opening trim weatherstrip LH.

  5. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  6. INSTALL COWL SIDE TRIM BOARD LH

    Click here

  7. INSTALL DOOR SCUFF PLATE ASSEMBLY LH

    Click here

  8. INSTALL FRONT FLOOR FOOTREST (for LHD)

    Click here

  9. INSTALL HEATER SWITCH ASSEMBLY


    1. Attach the 2 claws and install the heater switch assembly.

  10. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY

    Click here