COMPRESSOR(for 2TR-FE) REMOVAL

PROCEDURE


  1. REMOVE UPPER RADIATOR SUPPORT SEAL

    Click here

  2. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  3. REMOVE FRONT BUMPER COVER LOWER

    Click here

  4. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

  5. DRAIN ENGINE COOLANT

    Click here

  6. REMOVE RADIATOR RESERVOIR

    Click here

  7. REMOVE NO. 1 RADIATOR HOSE

    Click here

  8. REMOVE NO. 2 RADIATOR HOSE

    Click here

  9. REMOVE FAN AND GENERATOR V BELT

    Click here

  10. REMOVE FAN SHROUD

    Click here

  11. DISCONNECT VANE PUMP ASSEMBLY

    Click here

  12. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY


    1. B001G13E02
      Text in Illustration
      *A for Type A
      *B for Type B

      Remove the bolt and disconnect the discharge hose sub-assembly from the compressor.

    2. Remove the O-ring from the discharge hose.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering.

  13. DISCONNECT SUCTION HOSE SUB-ASSEMBLY


    1. B001H7IE03
      Text in Illustration
      *A for Type A
      *B for Type B

      Remove the bolt and disconnect the suction hose sub-assembly from the compressor.

    2. Remove the O-ring from the suction hose.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering.

  14. REMOVE COOLER COMPRESSOR ASSEMBLY


    1. Disconnect the connector.

    2. B001ELU

      Remove the 4 bolts and compressor.