REAR NO. 2 SEAT OUTER BELT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL SEAT BELT ANCHOR PLATE ASSEMBLY (for RH Side)


    1. Install the anchor plate with the 2 bolts.

  2. INSTALL REAR SEAT OUTER BELT ANCHOR PLATE SUB-ASSEMBLY LH


    1. Install the anchor plate with the bolt.

  3. INSTALL REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH

    B001G1VE04

    Note

    When installing the retractor, make sure the claws of the vehicle (labeled "a" in the illustration) only contact the installation areas of the retractor.


    1. Align the seat belt positioning holes with the claws and install the retractor of the seat belt with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

    2. Install the rear No. 2 seat outer belt shoulder anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  4. INSTALL REAR QUARTER TRIM PANEL ASSEMBLY LH

    Click here

  5. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH


    1. Attach the 4 clips and 8 claws to install the deck trim side panel.

    2. Install the 2 bolts and 2 screws.

    3. Install the rear No. 2 seat outer belt floor anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

    4. Install the rear No. 1 seat outer belt floor anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  6. INSTALL ASSIST GRIP SUB-ASSEMBLY

    Click here

  7. INSTALL ASSIST GRIP PLUG

    Click here

  8. INSTALL FRONT DECK SIDE TRIM COVER LH (w/ Tonneau Cover)

    Click here

  9. INSTALL NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)

    Click here

  10. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Click here

  11. INSTALL REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER

    Click here

  12. INSTALL FLOOR SIDE RAIL LH (w/ Deck Rail)

    Click here

  13. INSTALL FLOOR SIDE RAIL RH (w/ Deck Rail)

    Click here

  14. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

  15. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

  16. INSTALL QUARTER SCUFF PLATE LH

    Click here

  17. INSTALL REAR NO. 1 FLOOR STEP COVER

    Click here

  18. INSTALL REAR NO. 2 SEAT ASSEMBLY LH


    1. for Manual Seat Type:

      Install the rear No. 2 seat assembly LH Click here.

    2. for Power Seat Type:

      Install the rear No. 2 seat assembly LH Click here.