REAR NO. 1 SEAT ASSEMBLY(for 60/40 Split Double-folding Seat Type LH Side) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL REAR SEAT CUSHION LOCK STRIKER


    1. Install the striker with the 2 bolts.

      Torque:
      13 N*m  { 127 kgf*cm, 9 ft.*lbf }

  2. INSTALL REAR NO. 2 SEATBACK LOCK STRIKER SUB-ASSEMBLY LH

    B001CCRE01

    1. Attach the claw and install the striker with the 2 bolts.

    2. Tighten the bolts in the order indicated in the illustration.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

  3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

    Click here

  4. INSTALL FRONT DECK SIDE TRIM COVER (w/ Tonneau Cover)

    Click here

  5. INSTALL NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)

    Click here

  6. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Click here

  7. INSTALL REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER

    Click here

  8. INSTALL REAR FLOOR CARPET ASSEMBLY

    Click here

  9. INSTALL FLOOR SIDE RAIL LH (w/ Deck Rail)

    Click here

  10. INSTALL FLOOR SIDE RAIL RH (w/ Deck Rail)

    Click here

  11. INSTALL REAR FLOOR REAR MAT SUPPORT PLATE

    Click here

  12. INSTALL NO. 1 DECK BOARD SUB-ASSEMBLY

    Click here

  13. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER

    Click here

  14. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

  15. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

  16. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

  17. INSTALL REAR NO. 2 SEAT ASSEMBLY LH (w/ Rear No. 2 Seat)


    1. for Face to Face Seat Type:

      Install the rear No. 2 seat assembly Click here.

  18. INSTALL REAR SEATBACK LOCK CONTROL LEVER BASE LH


    1. Attach the cable clamp to connect the cable.

    2. B001FOV

      Move the cover in the direction of the arrow to attach the 2 guides.

    3. Attach the 6 claws to install the lever base.

  19. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY LH


    1. Install the hinge with the bolt.

      Torque:
      18 N*m  { 184 kgf*cm, 13 ft.*lbf }

  20. INSTALL REAR SEATBACK ASSEMBLY LH

    B001HJ4E01
    Text in Illustration
    *1 Positioning Wire

    1. Fold down the seatback, set the seatback positioning wire on the hinge, and then temporarily install the bolt to the hinge.

      Note

      Be careful not to damage the vehicle body.

    2. Restore the seatback to the upright position and temporarily install the seatback with the 2 bolts.

    3. Tighten the bolts in the order indicated in the illustration.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

  21. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY LH


    1. Attach the 4 claws and 5 clips to install the carpet.

  22. INSTALL REAR SEATBACK COVER


    1. Attach the 4 claws to install the cover.

    2. Restore the seatback to the upright position and lock it.

  23. INSTALL REAR SEAT HEADREST ASSEMBLY


    1. Install the headrest.

  24. INSTALL REAR SEAT CUSHION ASSEMBLY LH

    B001FJFE04

    1. Temporarily install the seat cushion with the 2 bolts.

      Note

      Be careful not to damage the vehicle body.

    2. Tighten the bolts in the order indicated in the illustration.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

    3. Lock the seat cushion.

  25. INSTALL REAR SEAT CUSHION HINGE COVER LH


    1. Attach the 3 claws to install the cover.

  26. INSTALL REAR SEAT CUSHION HINGE COVER RH


    1. Attach the 3 claws to install the cover.