CURTAIN SHIELD AIRBAG ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH (w/ Rear No. 2 Seat)


    1. Check that the ignition switch is off.

    2. Check that the cable is disconnected from the negative (-) battery terminal.

      CAUTION:

      Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    3. Install the curtain shield airbag with the 17 new bolts.

      Torque:
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

      Note

      Do not twist the curtain shield airbag when installing it.

    4. Connect the connector.

      Note

      When handling the airbag connector, take care not to damage the airbag wire harness.

  2. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH (w/o Rear No. 2 Seat)


    1. Install the curtain shield airbag with the 13 new bolts.

      Torque:
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

      Note

      Do not twist the curtain shield airbag when installing it.

    2. Connect the connector.

      Note

      When handling the airbag connector, take care not to damage the airbag wire harness.

  3. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH (for 3 Door)


    1. Install the curtain shield airbag with the 11 new bolts.

      Torque:
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

      Note

      Do not twist the curtain shield airbag when installing it.

    2. B001GEE

      Connect the connector.

      Note

      When handling the airbag connector, take care not to damage the airbag wire harness.

  4. INSTALL REAR NO. 2 SIDE RAIL SPACER LH (for 3 Door)

    Click here

  5. INSTALL NO. 1 AIR DUCT REAR SIDE (w/ Rear Cooler)

    Click here

  6. INSTALL NO. 2 AIR DUCT REAR SIDE (w/ Rear Cooler)

    Click here

  7. INSTALL ROOF HEADLINING ASSEMBLY


    1. for 5 Door:


      1. Install the roof headlining Click here.

    2. for 3 Door:


      1. Install the roof headlining Click here.