PARKING ASSIST ECU(for RHD) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart.

Click here

PROCEDURE


  1. INSTALL PARKING ASSIST ECU


    1. Install the parking assist ECU with the 2 bolts.

    2. Connect the 3 connectors.

  2. INSTALL DRIVER SIDE JUNCTION BLOCK ASSEMBLY


    1. except 5L-E:

      Click here

    2. for 5L-E:

      Click here

  3. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

    Click here

  4. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

    Click here

  5. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  6. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY

    Click here

  7. INSTALL INSTRUMENT PANEL FINISH PLATE GARNISH

    Click here

  8. INSTALL INSTRUMENT SIDE PANEL RH

    Tech Tips

    Use the same procedure described for the LH side.

    Click here

  9. INSTALL COWL SIDE TRIM BOARD RH

    Tech Tips

    Use the same procedure described for the LH side.

    Click here

  10. INSTALL DOOR SCUFF PLATE ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

    Click here

  11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  12. PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here

  13. CHECK SRS WARNING LIGHT

    Click here

  14. PERFORM INITIALIZATION

    Click here

  15. PERFORM MULTI-TERRAIN MONITOR SYSTEM CALIBRATION

    Click here