CLEARANCE WARNING BUZZER INSTALLATION

PROCEDURE

1. INSTALL NO. 1 CLEARANCE WARNING BUZZER

   
   

   1. Attach the clamp to install the No. 1 clearance warning buzzer.

   2. Connect the connector.

2. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

   Click here

3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

   Click here

4. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY

   Click here

5. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

   Click here

6. INSTALL INSTRUMENT CLUSTER FINISH PANEL ORNAMENT (for LHD)

   Click here

7. INSTALL INSTRUMENT SIDE PANEL LH (for LHD)

   Click here

8. INSTALL COWL SIDE TRIM BOARD LH (for LHD)

   Click here

9. INSTALL DOOR SCUFF PLATE ASSEMBLY LH (for LHD)

   Click here

10. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

    Click here

11. INSTALL INSTRUMENT SIDE PANEL RH (for RHD)

    Tech Tips

    Use the same procedure described for the LH side.

    Click here

12. INSTALL COWL SIDE TRIM BOARD RH (for RHD)

    Tech Tips

    Use the same procedure described for the LH side.

    Click here

13. INSTALL DOOR SCUFF PLATE ASSEMBLY RH (for RHD)

    Tech Tips

    Use the same procedure described for the LH side.

    Click here

14. INSTALL INSTRUMENT PANEL FINISH PLATE GARNISH (for RHD)

    Click here

15. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

16. PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here

17. CHECK SRS WARNING LIGHT

    Click here