QUARTER TRIM SPEAKER(for 3 Door) INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL NO. 2 SPEAKER BRACKET

   
   

   1. Align the positioning pin of the speaker bracket with the hole and temporarily install the bracket.

   2. Install the No. 2 speaker bracket with the 3 bolts.

      Torque:

      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

      Note

      Do not touch the cone of the speaker.

   3. Attach the clamp.

2. INSTALL REAR SPEAKER SET

   
   

   1. Temporarily install the speaker by attaching the 2 claws of the speaker to the door panel.

   2. Install the speaker with the 3 screws.

      Note

      Do not touch the cone of the speaker.

   3. Connect the connector.

3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

   Click here

4. INSTALL OUTER LAP BELT ANCHOR COVER

   Click here

5. INSTALL QUARTER TRIM POCKET TRAY

   Click here

6. INSTALL FRONT DECK SIDE TRIM COVER (w/ Tonneau Cover)

   Click here

7. INSTALL NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)

   Click here

8. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

   Click here

9. INSTALL REAR FLOOR CARPET ASSEMBLY

   Click here

10. INSTALL QUARTER TRIM COVER HOLE LH

    Click here

11. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE

    Click here

12. INSTALL MAT SET PLATE COVER

    Click here

13. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

14. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

15. INSTALL DOOR SCUFF PLATE ASSEMBLY LH

    Click here

16. INSTALL REAR NO. 1 SEAT ASSEMBLY

    
    

    1. for 60/40 Split Tumble Seat Type LH Side:

       Click here

    2. for 60/40 Split Tumble Seat Type RH Side:

       Click here

17. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.