STEERING GEAR REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. PLACE FRONT WHEELS FACING STRAIGHT AHEAD

  2. REMOVE FRONT WHEELS

  3. REMOVE ENGINE ASSEMBLY


    1. for 1GR-FE:

      Remove the engine Click here.

    2. for 1KD-FTV:

      Remove the engine Click here.

    3. for 5L-E:

      Remove the engine Click here.

    4. for 2TR-FE:

      Remove the engine Click here.

    5. for 1GD-FTV:

      Remove the engine Click here

  4. DISCONNECT NO. 2 STEERING INTERMEDIATE SHAFT


    1. for Manual Tilt and Manual Telescopic Steering Column:

      Disconnect the No. 2 steering intermediate shaft Click here.

    2. for Power Tilt and Power Telescopic Steering Column:

      Disconnect the No. 2 steering intermediate shaft Click here.

  5. DISCONNECT TIE ROD END SUB-ASSEMBLY LH


    1. B001CMNE01

      Using SST, disconnect the tie rod end assembly.

      SST
      09610-20012

  6. DISCONNECT TIE ROD END SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedures described for the LH side.

  7. DISCONNECT PRESSURE FEED TUBE ASSEMBLY (for LHD)


    1. B001F8E

      Remove the clamp and disconnect the pressure feed tube (return tube side) from the steering gear.

    2. B001EKM

      Using a union nut wrench, disconnect the pressure feed tube (pressure feed tube side) from the steering gear.

    3. Remove the bolt and disconnect the pressure feed tube clamp.

      B001HYJE01
      Text in Illustration
      *A for 1GR-FE: *B for 1KD-FTV:
      *C for 2TR-FE: *D for 5L-E:
      *E for 1GD-FTV: - -

  8. DISCONNECT PRESSURE FEED TUBE ASSEMBLY (for RHD)


    1. B001D6S

      Remove the clamp and disconnect the pressure feed tube (return tube side) from the steering gear.

    2. B001DX8

      Using a union nut wrench, disconnect the pressure feed tube (pressure feed tube side) from the steering gear.

    3. Remove the bolt and disconnect the pressure feed tube clamp.

      B001EWDE01
      Text in Illustration
      *A for 1GR-FE: *B for 1KD-FTV:
      *C for 2TR-FE: *D for 5L-E:
      *E for 1GD-FTV: - -

  9. REMOVE RACK AND PINION POWER STEERING GEAR ASSEMBLY


    1. B001D17

      Remove the 2 bolts, 2 nuts and steering gear assembly.

      Note

      Because the nut has its own stopper, do not turn the nut. Tighten the bolt with the nut fixed in place.