STARTER(for 2.0 kW Type) REMOVAL

PROCEDURE


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note


    • After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE REAR ENGINE UNDER COVER ASSEMBLY

    Click here

  3. DISCONNECT CLUTCH RELEASE CYLINDER ASSEMBLY (for Manual Transmission)

    Click here

  4. REMOVE STARTER ASSEMBLY


    1. B001H5V

      Remove the terminal cap.

    2. Remove the nut, and then disconnect the starter wire harness.

    3. Disconnect the starter connector.

    4. B001FLK

      for Automatic Transmission:

      Remove the 2 bolts and starter assembly.

    5. for Manual Transmission:


      1. B001HDWE01
        Text in Illustration
        *1 Clutch Flexible Hose Bracket

        Remove the bolt and disconnect the clutch flexible hose bracket.

      2. Remove the bolt and starter assembly.