DOOR CONTROL RELAY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • A bolt without a torque specification is shown in the standard bolt chart Click here.

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL DOUBLE LOCK DOOR CONTROL RELAY ASSEMBLY


    1. w/o Telematics Transceiver:


      1. Install the double door lock control relay assembly with the nut.

        Torque:
        5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

      2. Connect the connector.

    2. w/ Telematics Transceiver:


      1. Connect the connector.

      2. Install the double door lock control relay assembly with the nut.

        Torque:
        5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

  2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

    Click here

  3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  4. INSTALL INSTRUMENT PANEL ORNAMENT

    Click here

  5. INSTALL INSTRUMENT SIDE PANEL RH

    Click here

  6. INSTALL COWL SIDE TRIM BOARD RH

    Click here

  7. INSTALL DOOR SCUFF PLATE ASSEMBLY RH

    Click here