FRONT CRANKSHAFT OIL SEAL REMOVAL

PROCEDURE


  1. REMOVE UPPER RADIATOR SUPPORT SEAL

    Click here

  2. REMOVE RADIATOR RESERVOIR

    Click here

  3. REMOVE FAN SHROUD

    Click here

  4. REMOVE CRANKSHAFT PULLEY


    1. B001I5KE01
      Text in Illustration
      *a Loosen
      *b Hold

      Using SST, hold the crankshaft pulley and loosen the pulley bolt until 2 or 3 threads are screwed into the crankshaft.

      SST
      09213-54015   ( 91651-60855 )
      09330-00021
    2. B001HSZE01
      Text in Illustration
      *a Loosen
      *b Hold

      Using SST and the pulley bolt, remove the crankshaft pulley.

      SST
      09950-50013   ( 09951-05010, 09952-05010, 09953-05010, 09954-05021 )

      Tech Tips

      Apply lubricant to the threads and end of SST.

  5. REMOVE TIMING CHAIN CASE OIL SEAL


    1. B001IAFE01
      Text in Illustration
      *a Protective Tape

      Using a screwdriver, pry out the timing chain case oil seal.

      Note


      • Do not damage the surface of the timing chain case oil seal press fit hole or the crankshaft.

      • Check the crankshaft for damage after removing the timing chain case oil seal. If the crankshaft is damaged, smooth the surface with 400-grit sandpaper.

      Tech Tips

      Tape the screwdriver tip before use.