VALVE BODY ASSEMBLY (When Not Using the Engine Support Bridge) REMOVAL


  1. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY

    Tech Tips

    See the steps from "Remove Engine Assembly with Transaxle" through "Remove Automatic Transaxle Assembly" Click here.

  2. REMOVE TORQUE CONVERTER ASSEMBLY


    1. A01I0W1

      Remove the torque converter assembly from the automatic transaxle assembly.

  3. REMOVE AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY


    1. A01I18Y

      Remove the 19 bolts and automatic transaxle oil pan sub-assembly from the automatic transaxle assembly.

      Note

      Some fluid will remain in the automatic transaxle oil pan sub-assembly. Remove all the bolts, and carefully remove the automatic transaxle oil pan sub-assembly.

    2. Remove the automatic transaxle oil pan gasket.

    3. A01HXF6E01
      Text in Illustration
      *1 Transmission Oil Cleaner Magnet

      Remove the 4 transmission oil cleaner magnets from the automatic transaxle oil pan sub-assembly.

    4. A01HZ0D

      Examine the particles in the automatic transaxle oil pan sub-assembly.


      1. Use the removed transmission oil cleaner magnets to collect any steel chips. Examine the chips and particles in the automatic transaxle oil pan sub-assembly and on the transmission oil cleaner magnets to determine what type of wear has occurred in the automatic transaxle assembly.

        Result
        Steel (magnetic) Brass (non-magnetic)
        Bearing, gear and plate wear Bushing wear
  4. REMOVE VALVE BODY OIL STRAINER ASSEMBLY


    1. A01HXGW

      Remove the 2 bolts and valve body oil strainer assembly from the transmission valve body assembly.

    2. A01HY6CE02
      Text in Illustration
      *1 O-ring

      Remove the O-ring from the valve body oil strainer assembly.

  5. REMOVE TRANSMISSION VALVE BODY ASSEMBLY


    1. A01HYGA

      Remove the 11 bolts and transmission valve body assembly from the automatic transaxle assembly.

      Note

      When removing the transmission valve body assembly, be careful not to allow the transmission revolution sensor and the transaxle case sub-assembly to interfere with each other.

  6. REMOVE NO. 1 GOVERNOR APPLY GASKET


    1. A01I1V9

      Remove the 2 No. 1 governor apply gaskets from the transaxle case sub-assembly.

  7. REMOVE MANUAL VALVE


    1. A01HZ3V

      Remove the manual valve from the transmission valve body assembly.