AIR CONDITIONING PANEL(w/o Navigation System) REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. Click here

   PRECAUTION

   Note:

   After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).

2. Click here

   DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

3. Click here

   REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY

   Click here

4. Click here

   REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

   Click here

5. Click here

   REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

   Click here

6. Click here

   REMOVE NO. 1 CENTER INSTRUMENT CLUSTER FINISH PANEL (w/o Audio)

   Click here

7. Click here

   REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY (w/ Audio)

   Click here

8. Click here

   REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

   Click here

9. Click here

   REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

   Click here

10. Click here

    REMOVE NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

    Click here

11. Click here

    REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

    Click here

12. Click here

    REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

13. Click here

    REMOVE AIR CONDITIONING CONTROL ASSEMBLY

    
    
    1. 

       Pull the air conditioning control assembly to detach the 4 claws, 2 clips on the backside of the air conditioning control assembly.

    2. Disconnect the connectors and remove the air conditioning control assembly.