PROCEDURE
PRECAUTION
Note
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY
REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY
REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY
REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET
Remove the 2 screws and 2 bolts.
Pull the radio and display receiver assembly with bracket to detach the 6 claws and 2 clips on the backside of the radio and display receiver assembly with bracket.
Disconnect the connectors and remove the radio and display receiver assembly with bracket.
REMOVE NO. 1 RADIO BRACKET
Remove the 3 screws and bracket.
REMOVE NO. 2 RADIO BRACKET
Remove the 3 screws and bracket.
REMOVE CLOCK ASSEMBLY