WINCH UNIT INSTALLATION

PROCEDURE


  1. INSTALL WINCH ASSEMBLY


    1. A01WZTS

      Using a crane or equivalent, install the winch assembly.

      CAUTION:

      Be careful as the winch assembly is very heavy.

    2. A01WZ61

      Connect the wire with the nut.

      Torque:
      9.3 N*m  { 95 kgf*cm, 83 in.*lbf }

    3. Connect the connector.

    4. A01X9TQ

      Move the cover in the direction indicated by the arrow shown in the illustration and attach the 2 claws.

    5. A01X018E01

      Install the mounting bracket with the 9 bolts.

      Torque:
      for bolt A
      33 N*m  { 336 kgf*cm, 24 ft.*lbf }
      for bolt B
      19 N*m  { 194 kgf*cm, 15 ft.*lbf }

  2. INSTALL TRANSMISSION OIL COOLER AIR DUCT (w/ Air Cooled Transmission Oil Cooler)

    Click here

  3. INSTALL RADIATOR SIDE DEFLECTOR LH

    Click here

  4. INSTALL RADIATOR SIDE DEFLECTOR RH (w/o Air Cooled Transmission Oil Cooler)

    Click here

  5. INSTALL FRONT BUMPER COVER

    Click here