VEHICLE STABILITY CONTROL SYSTEM Multi-terrain Select Indicator Light Remains ON

Click here

DESCRIPTION

Refer to Multi-terrain Select Indicator Light does not Come ON (Click here).

Click here

PROCEDURE

1. Click here

   CHECK CAN COMMUNICATION LINE

   
   

   1. Turn the ignition switch off.

   2. Connect the GTS to the DLC3.

   3. Turn the ignition switch to ON and the GTS on.

   4. Select "CAN Bus Check" from the System Selection Menu screen, and follow the prompts on the screen to inspect the CAN Bus.

      OK
      "CAN Bus Check" indicates no malfunctions in CAN communication.

      Table 1. Result

      Result	Proceed to
      OK	A
      NG (for LHD)	B
      NG (for RHD)	C

   
   
   • AClick here
   • B

     GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) (Click here)

   • C

     GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) (Click here)

2. Click here

   CHECK DTC (CAN COMMUNICATION SYSTEM)

   
   

   1. Turn the ignition switch off.

   2. Connect the GTS to the DLC3.

   3. Turn the ignition switch to ON and the GTS on.

   4. Check for DTCs (for LHD: See page , for RHD:Click here).

      Table 2. Result

      Result	Proceed to
      CAN system DTC is not output	A
      CAN system DTC is output (for LHD)	B
      CAN system DTC is output (for RHD)	C

   
   
   • A

     GO TO METER / GAUGE SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) (Click here)

   • B

     GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) (Click here)

   • C

     GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) (Click here)