FRONT AXLE HUB BOLT REPLACEMENT

CAUTION / NOTICE / HINT

PROCEDURE

1. Click here

   REMOVE STABILIZER CONTROL VALVE PROTECTOR (w/ KDSS)

   Click here

2. Click here

   OPEN STABILIZER CONTROL WITH ACCUMULATOR HOUSING SHUTTER VALVE (w/ KDSS)

   Click here

3. Click here

   REMOVE FRONT WHEEL

4. Click here

   DISCONNECT FRONT DISC BRAKE CALIPER ASSEMBLY LH

   Click here

5. Click here

   REMOVE FRONT DISC

   Click here

6. Click here

   REMOVE FRONT AXLE HUB BOLT LH

   
   
   1. 

      Table 1.

      *1	Hold
      *2	Turn

      Using SST and a screwdriver or equivalent to hold the axle hub, remove the front axle hub bolt.

      09650-17011

      Note:

      Do not damage the threads of the hub bolt.

7. Click here

   INSTALL FRONT AXLE HUB BOLT LH

   
   
   1. 

      Table 2.

      *1	Washer
      *2	Nut
      *3	Hold
      *4	Turn

      Temporarily install a washer and hub nut to a new hub bolt as shown in the illustration.

      Note:

      Install a hub nut to prevent damage to the hub bolt.

   2. Using a screwdriver or equivalent to hold the hub, turn the hub nut until the bottom surface of the hub bolt head touches the axle hub.

   3. Remove the washer and hub nut.

      Note:

      Do not damage the threads of the hub bolt.

8. Click here

   INSPECT FRONT AXLE HUB BEARING LOOSENESS

   Click here

9. Click here

   INSPECT FRONT AXLE HUB RUNOUT

   Click here

10. Click here

    INSTALL FRONT DISC

    Click here

11. Click here

    CONNECT FRONT DISC BRAKE CALIPER ASSEMBLY LH

    Click here

12. Click here

    INSTALL FRONT WHEEL

    for Aluminum Wheel
    131 N*m	1336 kgf*cm	97 ft.*lbf
    for Steel Wheel
    209 N*m	2131 kgf*cm	154 ft.*lbf

13. Click here

    MEASURE VEHICLE HEIGHT (w/ KDSS)

    Click here

14. Click here

    CLOSE STABILIZER CONTROL WITH ACCUMULATOR HOUSING SHUTTER VALVE (w/ KDSS)

    Click here

15. Click here

    INSTALL STABILIZER CONTROL VALVE PROTECTOR (w/ KDSS)

    Click here