FUEL PRESSURE REGULATOR INSTALLATION

PROCEDURE


  1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY


    1. Apply a light coat of gasoline or spindle oil to a new O-ring and install the O-ring to the pressure regulator.

      Note


      • Make sure that there are no scratches or foreign matter in or around the insertion hole of the delivery pipe.

      • When inserting the pressure regulator, be careful not to damage the O-ring.

    2. B001W4B

      While turning the pressure regulator left and right, install it to the delivery pipe.

    3. Install the 2 bolts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

    4. Install the No. 1 air hose to the pressure regulator.

    5. Connect the No. 2 fuel tube to the pressure regulator Click here.

  2. INSTALL AIR CLEANER CAP AND HOSE

    Click here

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. INSTALL V-BANK COVER SUB-ASSEMBLY

    Click here

  5. INSPECT FOR FUEL LEAK

    Click here