POWER STEERING OIL PRESSURE SWITCH INSTALLATION

PROCEDURE

1. INSTALL POWER STEERING OIL PRESSURE SWITCH

   
   

   1. Apply a light coat of engine oil to the O-ring of the power steering oil pressure switch.

   2. Using a 19 mm deep socket wrench, install the power steering oil pressure switch.

      Torque:

      21 N*m  { 210 kgf*cm, 15 ft.*lbf }

      Note

      
      

      • Do not allow foreign matter to contact the oil seal face of the power steering oil pressure switch (connecting surface with pressure feed tube).

      • Be careful not to damage the O-ring when installing the power steering oil pressure switch.

   3. Connect the power steering oil pressure switch connector.

2. INSTALL RADIATOR RESERVOIR ASSEMBLY

   Click here

3. INSTALL NO. 1 OIL RESERVOIR BRACKET

   Click here

4. INSTALL VANE PUMP OIL RESERVOIR ASSEMBLY

   Click here

5. INSTALL NO. 1 AIR CLEANER PIPE SUB-ASSEMBLY

   Click here

6. INSTALL HEATER WATER PIPE SUB-ASSEMBLY (w/ Viscous Heater)

   Click here

7. INSTALL NO. 3 AIR TUBE

   Click here

8. INSTALL NO. 1 AIR HOSE

   Click here

9. INSTALL INTAKE AIR CONNECTOR

   Click here

10. TEMPORARILY INSTALL NO. 1 AIR CLEANER HOSE

    Click here

11. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

    Click here

12. CONNECT WATER HOSE SUB-ASSEMBLY (w/ Viscous Heater)

    
    

    1. Connect the 2 water hoses.

13. INSTALL NO. 2 COOL AIR INLET (w/o Intercooler)

    Click here

14. INSTALL NO. 1 COOL AIR INLET (w/o Intercooler)

    Click here

15. INSTALL INTERCOOLER ASSEMBLY (w/ Intercooler)

    Click here

16. INSTALL V-RIBBED BELT

    Click here

17. INSTALL NO. 3 IDLER PULLEY (w/ Viscous Heater)

    Click here

18. INSTALL NO. 1 IDLER PULLEY (w/ Viscous Heater)

    Click here

19. INSTALL V-RIBBED BELT (w/ Viscous Heater)

    Click here

20. ADD ENGINE COOLANT

    Click here

21. INSPECT FOR COOLANT LEAK

    Click here

22. INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

23. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

    Click here

24. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

    Click here