CAUTION / NOTICE / HINT
Tech Tips
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE
INSTALL REAR UPPER BUMPER RETAINER
Install the rear upper bumper retainer with the screw.
INSTALL REAR BUMPER ASSEMBLY
INSTALL REAR COMBINATION LIGHT ASSEMBLY
Engage the grommet.
Connect the connector.
Engage the clamp.
Engage the 3 guides and pin to temporarily install the rear combination light assembly.
Install the rear combination light assembly with the 2 screws.
INSTALL REAR COMBINATION LIGHT COVER
Engage the 3 claws as shown in the illustration.
Engage the 2 claws to install a new rear combination light cover as shown in the illustration.
INSTALL DECK TRIM SIDE PANEL ASSEMBLY
CONNECT REAR SEAT OUTER BELT ASSEMBLY
INSTALL NO. 2 ROOM LIGHT ASSEMBLY (for RH Side)
INSTALL TONNEAU COVER HOLDER CAP
INSTALL TONNEAU COVER HOOK
INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY
INSTALL ROPE HOOK ASSEMBLY
INSTALL REAR SEAT SIDE GARNISH
INSTALL REAR SEAT SIDE COVER RH (for RH Side)
INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP
for LH Side:
for RH Side:
INSTALL REAR DOOR SCUFF PLATE
INSTALL REAR DECK TRIM COVER
INSTALL DECK TRIM SERVICE HOLE COVER
INSTALL REAR NO. 1 FLOOR BOARD
INSTALL REAR NO. 2 FLOOR BOARD SUB-ASSEMBLY
INSTALL REAR NO. 1 FLOOR BOARD SUB-ASSEMBLY
INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)
INSTALL DECK FLOOR BOX LH (w/o Woofer)
INSTALL REAR NO. 4 FLOOR BOARD (w/o Woofer)
INSTALL REAR NO. 4 FLOOR BOARD (w/ Woofer)
INSTALL REAR SEATBACK ASSEMBLY RH (for RH Side)
INSTALL REAR SEATBACK ASSEMBLY LH (for LH Side)
INSTALL REAR SEAT CUSHION LOCK HOOK
INSTALL REAR SEAT CUSHION ASSEMBLY
INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE (for RH Side)
INSTALL DECK FLOOR BOX RH
INSTALL REAR NO. 3 FLOOR BOARD
INSTALL REAR DECK FLOOR BOX
INSTALL REAR NO. 2 FLOOR BOARD